Licensed electricians serving San Bruno, CA — residential and commercial electrical services with same-day availability.
Our full range of electrical services covers everything your home or business needs — all performed to current NEC code.
Aluminum wiring installed in homes from the 1960s and 1970s is a documented fire hazard. Replacing it with modern copper wiring dramatically reduces your risk and may lower your insurance premiums.
Carbon monoxide is colorless and odorless, making professional detector placement critical. Properly installed CO detectors give your family early warning before dangerous levels build up.
Enjoy your pool or hot tub with confidence knowing the electrical system was installed safely by a licensed professional. Proper wiring prevents shock hazards and protects your family every time you swim.
From flickering lights and dead outlets to tripping breakers and buzzing switches, fast electrical repairs restore your home to safe, reliable operation and give you peace of mind.
A faulty circuit breaker that trips constantly or will not reset leaves your home without power and at risk. Fast professional repair restores reliable power and eliminates a potential fire hazard.
Outdoor wiring must withstand moisture, temperature swings, and soil contact. Our electricians use UL-listed wet-rated fixtures, GFCI-protected circuits, and proper burial depths to ensure lasting safety.
Working smoke detectors cut your risk of dying in a home fire nearly in half. Hardwired, interconnected units alert your entire household the moment smoke is detected anywhere.
An upgraded electrical panel supports modern power demands, prevents tripped breakers, and can increase your home value. Stop managing an overloaded system and power your home with confidence.
We plan the new circuit layout, pull permits, run code-compliant copper wiring through your walls and attic, install a new panel if needed, and restore your walls with minimal disruption.
Upgrade your home with new light fixtures that transform the look and feel of every room. Professional installation ensures proper support, clean wiring, and the right dimming compatibility.
We install a Type 2 surge protection device directly at your electrical panel, wire it to a dedicated double-pole breaker, and verify the grounding system that makes it effective.
Wireless cameras lose signal and batteries die at the worst time. Hardwired security camera systems installed by our licensed team provide continuous, tamper-resistant surveillance you can rely on day and night.
Recessed lighting installed too close to insulation or with incorrect housings is a fire risk. Our electricians use only IC-rated, airtight fixtures and verify every connection for safe operation.
An electrical inspection reveals hidden hazards, code violations, and aging components before they cause problems. Protect your investment whether you are buying, selling, or simply maintaining your home.
Ceiling fans involve heavy fixtures and live wiring above your head. Our licensed electricians ensure every connection is secure, every mount is load-rated, and every fan runs safely.
Overloaded outlets and daisy-chained power strips are leading causes of electrical fires. We install dedicated circuits with proper grounding and tamper-resistant receptacles to keep your family safe.
Commercial electrical work requires strict code compliance, proper load calculations, and coordination with inspectors and general contractors. Our licensed commercial electricians deliver permitted, inspected, and insured work on every project.
Smart devices need proper wiring to function reliably. Many older homes lack neutral wires in switch boxes, causing flickering or device failure. Our electricians verify and upgrade wiring so your smart home works right.
Our licensed electricians handle every step of your generator install, from sizing the unit and pouring the pad to wiring the automatic transfer switch and final testing.
We assess your panel capacity, install a dedicated 240V circuit, mount the charging unit in your garage or driveway, and handle all permits and inspections from start to finish.
Stop guessing why your power is acting up. Professional electrical troubleshooting pinpoints hidden problems fast, saving you time and preventing damage to your home and devices.
From new construction wiring to appliance hookups and dedicated circuits, professional electrical installation ensures everything works correctly and meets code from day one.
Improper doorbell wiring can damage your transformer or void your warranty. Our electricians verify voltage, test connections, and ensure your Ring operates safely and reliably.
San Bruno property owners are upgrading to electric vehicles, smart thermostats, solar panels, and high-draw appliances at an accelerating pace — and the electrical systems in most California homes were not built for that kind of load. With 41,177 residents pushing their panels harder every year, JJC Electric provides the technical expertise to modernize San Bruno electrical systems safely, efficiently, and to full NEC compliance.
Our approach to electrical work in San Bruno, CA starts with understanding the complete picture. Load calculations, wire gauge verification, panel capacity analysis, and grounding system evaluation are standard on every JJC Electric project — not optional extras. Whether you need a single dedicated circuit or a complete service upgrade, our crews engineer solutions that perform reliably for decades.
What sets JJC Electric apart from other electrical contractors — quality, safety, and service you can count on.
Over three decades of hands-on electrical experience across residential, commercial, and industrial projects — from simple outlet repairs to complex panel upgrades.
Fully licensed electricians with general liability and workers' compensation coverage. We pull permits, coordinate inspections, and guarantee code compliance.
Founded by a U.S. Navy veteran with nuclear power training — every connection is tested, every circuit verified, and every job completed to the highest standard.
Every project meets or exceeds current National Electrical Code standards. Our technicians maintain ongoing NEC continuing education with each code cycle.
Our electricians treat your home like their own — shoe covers, drop cloths, and a thorough cleanup before we leave. Your property stays spotless.
Everything you need to know about electrical work for your home or business — from permits to pricing.
Yes. JJC Electric handles all electrical permits and inspections required by San Bruno and California building codes. Permitted work protects your investment, maintains your insurance coverage, and ensures everything is done to current National Electrical Code standards.
Electrical service costs in San Bruno vary by project. Outlet installations typically run $150 to $350, panel upgrades $1,500 to $4,000, and whole-house rewiring $8,000 to $20,000 depending on home size. JJC Electric provides free written estimates for all electrical work in San Bruno, CA with no hidden fees.
Yes. Electrical work in San Bruno requires a licensed electrician to meet California and local code requirements. Unlicensed wiring is a fire hazard, voids insurance, and will fail inspection. JJC Electric provides fully licensed, insured electricians for every job in San Bruno — residential and commercial.
Every job JJC Electric performs in San Bruno, CA meets or exceeds the current National Electrical Code and all local amendments. We stay current on California code changes and pull permits to ensure your work passes inspection the first time.
If your San Bruno home still has a 100-amp or smaller panel, uses fuses instead of breakers, trips breakers frequently, or you are adding major appliances like an EV charger or hot tub, it is time for a panel upgrade. JJC Electric installs 200-amp panels that handle modern electrical demands safely.
Warning signs include frequent breaker trips, flickering or dimming lights, discolored outlets, burning smells near switches, two-prong outlets throughout the house, and knob-and-tube or aluminum wiring. If your San Bruno home is over 40 years old, JJC Electric recommends a professional electrical inspection to assess wiring condition.
Our reputation is built on every connection we make — hear from customers who've experienced the JJC Electric difference.
"Needed a 240-volt outlet for our EV charger. JJC Electric came out, assessed the panel capacity, ran the wire through the attic to the garage, and had it done in half a day. Clean work, fair price, no mess."
"JJC Electric installed recessed lights in our basement and wired a new sub panel for the finished space. They worked around our schedule, kept the workspace clean, and the finished product looks professional. Would hire again."
"Had our electrical panel upgraded to support the new addition we built. JJC Electric coordinated with the general contractor and the city inspector. Good communication and the work was done right. Fair pricing too."
JJC Electric provides licensed electricians to cities and towns across the area — find service near you.